Tumehall metallist tööstuslik kappseade kahe sektsiooni ja kolme juhtnupuga tugijalgadel

Oil Separators

Oil separators OUPC 2000 - 4040

The OUPC 2000–4040 oil separator is a compact multi-stage filtration solution for coolants and lubricants, designed for floor installation

Four-stage filtrationThe system covers all major mist types: oil mist, emulsion mist, MQL and oil smoke.

HEPA H13The final filtration stage removes over 99.95% of smoke particles down to 0.1 µm.

Pressure monitoringMonitoring of the first three filtration stages with differential pressure gauges.

Fast maintenanceThe pre-filter is replaceable via the front door and the DIN cassette is installable from the top.

Request a quote

The OUPC 2000–4040 oil separator is a compact multi-stage filtration solution for cooling and lubricating agents, designed for floor installation. The unit effectively removes oil mist, emulsion mist, minimum quantity lubrication (MQL) and oil smoke, and is suitable for decentralised air extraction directly from processing machines.

The four-stage filter system ensures optimal filtration for every type of lubricant. The separator can be positioned in the immediate vicinity of processing machines with higher air demand.

Key benefits

Four-stage filtration covering all main types of mist: oil mist, emulsion mist, MQL and oil smoke

Very high separation rate – at least 99.95% of all cooling-lubricating agents

The final stage is a HEPA filter (class H13), which removes >99.95% of smoke particles down to 0.1 µm

Washable PPi35 pore filter (50% higher efficiency than an aluminium grease filter) ensures a long service life and low pressure loss

Self-draining cassette filter G104A – separates >99% of particles above 0.1 µm

Low operating costs thanks to lower energy consumption and less frequent filter changes

Compact, space-saving vertical design for floor installation

Integrated fan in a sound-insulating housing saves clean air side ductwork (where recirculation is permitted)

Quick maintenance – the pre-filter is replaceable via the front door, the DIN cassette is installable from the top

Monitoring of the first three filter stages with differential pressure gauges

Reduces the risks of health, fire and damage to machine electronics when oil mist is removed directly at the machine

Air volume OUPC 2000/2020kuni 2000 m³/h

Air volume OUPC 4000/4040kuni 4000 m³/h

Filter classH13 (DS EN 1822)

Separation efficiencymin. 99,95%

Filtration stages4 (PPi35 → cassette filter G104A → HEPA H13)

Ventilaator (2020/4040)type VR, 3x400 VAC, 50 Hz, 2800 rpm, with closed fan impeller

Motor>0.75 kW, 3x400 V, IE3

Liquid reservoirWith ½" drain valve beneath the first two filter stages

Cartridge filterø325 mm, length 330/660 mm, G104A (polyester/fiberglass)

HEPA filter610x610x292, fiberglass in metal frame

Filter cabinet2 mm black steel plate, powder-coated RAL 7042/7011

Compliance with Directives2006/42/EC, EMC 2014/30/EU, 2014/35/EU

Very high resolutionRemoves at least 99.95% of all cooling lubricants.

Low operating costsLower energy consumption and less frequent filter changes keep costs down.

Long service lifeThe washable PPi35 pore filter is 50% more efficient than an aluminium grease filter and ensures low pressure loss.

Space-savingThe compact vertical design is installed on the floor near the machine.

Reduced risksReduces the risks of health hazards, fire, and damage to machine electronics by removing oil mist directly at the machine.

Common questions about this product.

Frequently asked questions

How much air volume can the OUPC models handle?

The OUPC 2000/2020 handles up to 2000 m³/h and the OUPC 4000/4040 up to 4000 m³/h.

What is the device's separation rate and does it remove fine smoke particles?

The separation efficiency is at least 99.95% of all coolant-lubricants, and the final HEPA H13 stage removes >99.95% of smoke particles down to 0.1 µm.

Which types of mist can the device remove?

Four-stage filtration covers oil mist, emulsion mist, MQL (minimum quantity lubrication), and oil smoke.

How is filter maintenance and monitoring carried out?

The pre-filter is replaceable via the front door and the DIN cassette is installable from above, while the condition of the first three filter stages is monitored with differential pressure gauges.

Where and how is the device installed?

The unit is a compact, vertically constructed floor-mounted solution that can be positioned in the immediate vicinity of processing machines with higher air demand for decentralised air extraction.

Need help finding the right solution?

We help you choose the solution that fits your needs and production.

Send request →

Quality materialsDurable industrial quality and long service life.

Experienced partnerWe help design, install and maintain.

Support & spare partsFast help and spare-part availability throughout the lifecycle.