Unifog humidification nozzles

The stainless steel UNIFOG humidification nozzles with a non-return valve ensure precise operation and drip-free humidification with a capacity of 2.2–4.5 l/h.

Stainless steelNozzles are made of stainless steel.

Check valveThe valve closes when the water pressure drops below 30 bar, eliminating afterdrip.

Various sizesAvailable in the range of 2.2 – 4.5 litres per hour.

Press-fit fasteningNozzles attach to the line with nozzle holders using a special crimping tool.

Request a quote

UNIFOG humidification nozzles are made of stainless steel. The nozzles are available in various sizes with a flow rate ranging from 2.2–4.5 litres per hour.

Check valve — no drip after shut-off

The nozzles are equipped with a check valve that closes when the water pressure drops below 30 bar. This ensures flawless operation of the nozzles and eliminates residual-pressure drip after shut-off.

Installation

The nozzles are attached to the line with nozzle holders, which are pressed onto the line using a special pressing tool.

MaterialStainless steel

Throughflow2.2 – 4.5 liters per hour

Valve closing pressureBelow 30 bar

DurableNozzles made of stainless steel withstand humid environments.

It does not dripThe check valve eliminates post-drip caused by residual pressure.

Precise operationThe valve closes at low pressure, ensuring perfect nozzle operation.

Flexible selectionDifferent sizes allow you to select the flow rate suitable for your needs.

Common questions about this product.

Frequently asked questions

What material are Unifog humidification nozzles made of?

Nozzles are made of stainless steel.

What are the flow capacity sizes of the nozzles?

Nozzles are available in various sizes ranging from 2.2 – 4.5 liters per hour.

At what water pressure does the backflow valve close?

The backflow valve closes when the water pressure drops below 30 bar.

How is nozzle post-dripping prevented?

The nozzles are equipped with a non-return valve, which upon closing eliminates post-drip caused by residual pressure.

How are the nozzles attached to the track?

Nozzles are attached to the line with nozzle holders, which are pressed into place using a special pressing tool.

Need help finding the right solution?

We help you choose the solution that fits your needs and production.

Send request →

Quality materialsDurable industrial quality and long service life.

Experienced partnerWe help design, install and maintain.

Support & spare partsFast help and spare-part availability throughout the lifecycle.