Helland Baltic dust collection system with sanding tables
We added two sanding tables with a back wall and lamellar side walls for intermediate sanding on the Helland Baltic finishing line. To increase the system's efficiency, we offered automatic start-up and pressure control so that the equipment would not run idle. We used equipment from the Danish manufacturer V.Aa. GRAM, which is known for its durability.
Project challenge
The client's finishing process required an intermediate sanding stage, which called for a suitable sanding station solution with dust extraction. It was also important that the equipment would not run idle or waste energy.
How we built the solution
We added two sanding tables with a rear wall and lamella side walls to the finishing line for intermediate sanding. To increase the efficiency of the system, we offered the client automatic start-up and pressure control, so that the equipment would not have to run idle. In the project we used equipment from the Danish manufacturer V.Aa. GRAM, which has proven itself over time to be highly durable.
- 2 sanding tables for intermediate sanding
- Rear wall and lamella side walls
- V.Aa. GRAM (Denmark) equipment
- Automatic system start-up
- Pressure control to prevent idle running
Automation
Automatic system start-up and pressure control ensure that the equipment switches on only when needed. This prevents idle running and increases the overall energy efficiency of the system.
Result
Helland Baltic received a reliable and energy-efficient intermediate sanding solution that supports the finishing process and reduces unnecessary energy consumption thanks to automatic start-up and pressure control.
Galerii
FAQ
Frequently asked questions
How many sanding tables were installed in the Helland Baltic solution?
Which manufacturer's equipment was used in the project?
How does the system ensure energy efficiency?
What was the main goal of the project?
What result did the client get?
Projects
More similar projects
Viljandi Aken ja Uks: CNC line installation and dust extraction system construction
We built and installed a CNC line together with an aspiration system installation in the Viljandi Aken ja Uks production facility. The line was first manufactured and tested at the Essepigi factory in Italy, after which we installed the same system in Estonia. We got the system operational before the arrival of the factory representatives, who completed the fine-tuning.
Extraction of fine dust from the chipper at the point of origin with a mobile hood
We designed and implemented a solution that removes the fine dust generated during the shredder's operating process directly at the point of origin. We utilized the client's existing aspiration filter, to which we built new ductwork and a movable hood above the machine. In addition, we installed a room extraction nozzle for cleaning tasks. As a result, the need for cleaning and maintenance was reduced and the room remains dust-free.
Aspiration System Audit, Design and Reconstruction
We carried out a thorough audit, mapping, and reconstruction of the client's production aspiration system. Previously, all equipment was connected behind a single filter, which caused excessively low air velocity in many machine tools and led to production problems. We measured air velocities, calculated air requirements, and distributed the equipment between two filters, replacing the old ducting with new piping compliant with the project. The client was handed a comprehensive document folder containing a precise ducting diagram and the measured data.