Partners
C.I.C. õhukäitlusagregaadid
C.I.C. Jan Hřebec teeb õhukäitlusagregaate tööstuslikule ventilatsioonile. Elisteri valikus on H ja HL seeria, soojuspumbaga H-UNI ning katusele paigaldatavad H-TOP agregaadid.
Agregaat toob hoonesse värske õhu ja võtab väljuvast õhust soojuse tagasi. Neid seadmeid oleme kasutanud värviliinide ja tootmishallide ventilatsioonilahendustes — vaata tehtud töid.
Where C.I.C. Jan Hřebec equipment is used
Projects
Projects with C.I.C. Jan Hřebec equipment
Taikse Puit Finishing Room Major Renovation with Energy-Efficient Ventilation
We carried out a comprehensive upgrade of the finishing room at furniture manufacturer Taikse Puit OÜ. Clean air is now ensured by an energy-efficient ventilation system based on a plate heat exchanger, complemented by a solvent sensor for automatic system control and to ensure safety. Finishing quality is improved by the GRACO Merkur finishing kit together with the G40 finishing gun.
Heat energy recovery from paint lines
We installed a heat recovery ventilation unit on one of the spraying lines at Harviker OÜ's furniture factory, capturing thermal energy from the air exhausted by the finishing machine and drying oven and using it to preheat the supply air. The system operates automatically, monitoring the volume of exhausted air and the vacuum in the factory with pressure sensors. In addition, we assisted in setting up the drying oven previously procured by the client and carried out the installation and connection of the heating water pipelines.
Heat Recovery Ventilation and Air Exchange System
For Lasita Maja's new Makor coating line, we implemented efficient heat recovery and factory air compensation. We installed two units with an air exchange rate of 25,000 m³/h, which, according to our calculations, required no heating section, and completed all overhead air ducting above the ovens. The system operates automatically and monitors the working process using pressure sensors, ensuring trouble-free operation of the line's equipment.
Semi-automatic wet painting line for the new production building
We installed a liquid paint line for painting openings' fillers in Saku Metall's new production building, based on a semi-automatic conveyor system with a lifting section of up to 500 kg and 20 booms (spacing 350 mm). The water-heated ventilation units of the paint room and drying tunnel are heated by an autonomous gas boiler, and the entire line is controlled by a Siemens touchscreen control panel. Safety is ensured by solvent sensors, which automatically activate the ventilation, as well as Atex zone 1 luminaires. Two GRACO Merkur 48:1 high-pressure paint pumps were installed for painting.
Custom furniture finishing room with energy-efficient automation
We designed and installed a modern, energy-efficient and easy-to-operate finishing room for the manufacture of custom-made furniture at SunShip OÜ's new production facility. The solution includes a finishing room with a plate heat exchanger and water heating, automation logic based on solvent sensors, as well as 5-stage filtered exhaust and supply air.
Production Welding Hall Ventilation
Elister calculated and installed heat-recovery fresh air ventilation for the production hall, which the previous welding solution with filter towers did not include. The work covered design, measurements, as well as a turnkey solution.
FAQ
