Semi-automatic wet painting line for the new production building
We installed a liquid paint line for painting openings' fillers in Saku Metall's new production building, based on a semi-automatic conveyor system with a lifting section of up to 500 kg and 20 booms (spacing 350 mm). The water-heated ventilation units of the paint room and drying tunnel are heated by an autonomous gas boiler, and the entire line is controlled by a Siemens touchscreen control panel. Safety is ensured by solvent sensors, which automatically activate the ventilation, as well as Atex zone 1 luminaires. Two GRACO Merkur 48:1 high-pressure paint pumps were installed for painting.
Galerii
FAQ
Frequently asked questions
How heavy products can this conveyor system handle?
How many booms are on the conveyor and what is the distance between them?
What painting equipment is used on the line?
How is a safe working environment ensured?
Is the system expandable in the future?
Projects
More similar projects
Ventilation solution for a metal finishing room for a 70 m paint room
We designed a new painting area ventilation system for a metal structures manufacturing company in Harju County, in a 70 m long paint room. We installed 9 exhaust walls with filters across three work sections, along with a spark-proof fan with an air exchange rate of 15,000 m³/h. The operator can control all three sections independently using control automation based on pneumatic dampers.
New paint booth and energy-efficient drying room for the metal industry
We designed and built a completely new paint room ventilation solution for a metal industry client and upgraded the existing drying room. We used CIC Ex equipment and Konwektor fans suitable for explosive environments, and replaced the ventilation unit with a plate heat exchanger solution that improves heat recovery and reduces energy consumption. We added solvent sensors, compressed air meters, heat meters, and new automation with remote management capability. The result is a reliable, modern, and energy-efficient system that meets all applicable safety and working condition requirements.
Liquid Coating Line for the New Factory in Saue
We designed a complete liquid painting line for the new production building of the machine-building company Sami AS. The solution included two paint booths with water-heated heat exchangers, providing air exchange of 10,000 m³/h per booth, a washing booth with a Husqvarna pressure washer, and a motorized monorail conveyor with a load capacity of 16,000 kg. The line was complemented by control automation with solvent sensors, a 2K electronic mixing dosing unit, and two GRACO electrostatic spray guns.