In the woodworking industry, ambient-temperature glue is one of the most widely used types of adhesive - suitable for pressing plywood, gluing panels, edge banding and processing profiled parts. The right pump ensures accurate dispensing, stable pressure and less material wastage.
Elister on Graco official representative in Estonia and offer Graco's full range of cold glue pumps: both pneumatic and electric solutions - from small manual pumping units to high volume automatic production lines.
Check-Mate is Graco's sample product for pumping medium to high viscosity adhesives and fillers from buckets or drums into dispensing systems. Powered by a pneumatic motor, it is ideally suited for high volume production lines. Available as a stand-alone pump or as a bucket-based delivery system.
See the Check-Mate page on Graco.com →
Dura-Flo pumps provide consistent control and delivery stability when pumping adhesives and fillers. High-pressure pumps can achieve high pressures without compromising flow stability - directly integratable for process efficiency. Particularly suited to applications requiring accurate and consistent material delivery.
See the Dura-Flo page on Graco.com →
The E-Flo SP is Graco's next generation electric delivery pump developed for industrial and automotive adhesives and fillers applications. Compared to pneumatic pumps, the E-Flo SP offers enhanced control capabilities, improved efficiency and critical performance data. Ideal for applications where accuracy and process control are paramount.
See the E-Flo SP page on Graco.com →
The DynaMite uses the Graco NXT air motor to provide the power to move viscous materials from small containers. Delivers accurate and consistent fluids from 300cc cartridges to 1-gallon (≈4.5 l) containers. Ideal for workshops and smaller production environments.
See the DynaMite page on Graco.com →
The Graco T2 in our range is a compact and reliable cold glue pump, especially suitable for woodworking companies. The T2 is easy to install and requires minimal maintenance, making it ideal for everyday use in a production environment.
The following factors are important when choosing a pump:
Elister can advise you on the right Graco solution - contact us and we will find the right pump for your production.
Ambient adhesives work at room temperature and need time or pressure to cure - for example PVAc wood adhesive. Hot melt melts and hardens quickly on cooling. Cold glue is suitable for pressing techniques and for surfaces where longer working times are required.
Some Graco ambient pumps are also compatible with moisture-sensitive PUR adhesives, but this depends on the specific model and material. Please consult Elister to ensure compatibility with your adhesive type.
Graco ambient pumps support a wide range of containers: from 1 litre cans to 1200 litre drums. The DynaMite is suitable for cassettes and smaller containers, the Check-Mate and Dura-Flo for larger drums.
Yes - Elister offers a full service: advice, equipment selection, supply, installation, set-up and after-sales service. Our technicians are Graco trained.
The Graco DynaMite is a compact cold glue delivery system that uses the Graco NXT air motor for precise delivery of viscous materials from small containers. Ideal for workshops and smaller production environments where accurate and consistent adhesive delivery is required. Key features Graco NXT air motor - enhanced power for moving viscous materials Containers: from 300cc cartridges to 1-gallon (~4.5 l) containers Compact design - suitable for limited [...] Compact design - suitable for limited [...]
The Graco E-Flo SP is a next-generation electric cold adhesive delivery pump developed for industrial and automotive adhesive and sealant applications. Compared to traditional pneumatic pumps, the E-Flo SP offers enhanced control capabilities, improved energy consumption and real-time critical performance data. Key features Electric motor - better energy savings and control accuracy compared to pneumatic pumps Real-time performance data - monitor flow, pressure and energy consumption [...] [...]
The Graco Dura-Flo is a pneumatic cold glue pump that provides consistent control and stable delivery flow when pumping adhesives and sealants. Achieving high pressures without compromising flow stability - Dura-Flo pumps are designed to be integrated directly into your production process for increased efficiency. Key features High pressure without compromising flow stability Integratable to increase process efficiency Suitable for precise delivery of adhesives and sealants Strong and durable [...]
The Graco Check-Mate is a pneumatic cold glue pump, ideally designed for pumping medium to high viscosity adhesives and fillers. Available as a stand-alone pump or as a complete vane-based delivery system - from buckets to large containers. Uses advanced air motor technology for maximum production uptime. Key features Suitable for medium to high viscosity adhesives and sealants Flexible configuration - available as a stand-alone pump or as a bucket delivery system [...]
The Graco T2 is a 2:1 pneumatic transfer pump designed to deliver viscous binary materials - such as polyurethane foam and polyurea - directly from the drum to the reactor metering machine. Thanks to PTFE seals and stainless steel wetted parts, the pump is resistant to aggressive materials and ensures stable operation under production conditions. Key features 2:1 pressure transmission ratio - suitable for medium and high viscosity materials PTFE seals [...]
