Aabo-Ideal pesuvannide järgsed kuivatusahjud - Elister
/
Metal industry
Powder coating technologiesLiquid dyeing technologiesConveyor systemsPaintingrooms and -linesRobot solutionsMeasuring instrumentsDedustingIndustrial ventilationWelded ventilationBlasting technologiesHeat recovery solutions
/
Powder coating technologies
Suspension solutionsMasking solutionsGema automatic equipmentOptiFlex® Pro handheld devicesPowder coating hand boothsAabo-Ideal stovesMetal pre-wash systems
/
Aabo-Ideal stoves
/
Aabo-Ideal drying ovens after washbasins

Aabo-Ideal drying ovens after washbasins

The kiln is typically used with manual or Power & Free conveyor systems, where heat treatment is part of the gradual finishing process.

Furnaces are also used as a stand-alone unit, where the elements to be processed are transported for heat treatment, e.g. by means of rollers and racks, or suspended directly from the furnace chamber by means of mounts above.

AABO-IDEAL post-bath drying ovens are available for different temperature ranges. This means that the insulation layers and constructions of the oven are different.

  • 0 - 100 °C: 100 mm, 2 mineral wool layers
  • 100 - 250 °C: 310 mm, 3 mineral wool layers
  • 250 - 550 °C: 450 mm, 1 brand layer + 3 mineral wool layers.

AABO-IDEAL post-wash drying ovens have a "submersible" housing, suspended using minimal contact points with the external structure. This minimises the formation of a thermal bridge.

Ask for a quote

AABO-IDEAL downstream drying ovens are all convection-based, ensuring optimal energy use.

The heat is introduced into the lower compartment of the oven chamber either through air ducts in the floor or in the walls. Air circulates from the top of the oven chamber through the entire heater. This ensures a correct and optimum distribution of hot air, as well as an even heat transfer to the objects to be treated.

AABO-IDEAL post-bath drying ovens are available:

  • As sluice furnaces, where the elements to be processed are transported through an air trap located in the furnace chamber at the inlet/exit.
  • Door-type furnaces, where the elements to be treated are transported through a swing or sliding door located in the entry/exit of the furnace chamber. Doors are available in both manual and automatic versions.
FeatureValue
Heating methodelectricity, gas, oil
Doorsmanual, automatic
Heating sourcegas, electricity, oil

Vaata lisaks

Aabo-Ideal tunnel type ovens

The kiln is typically used with manual or Power & Free conveyor systems, where heat treatment is part of the gradual finishing process. Ovens are also used as a stand-alone unit, where the elements to be treated are transported for heat treatment, e.g. by means of rollers and racks, or suspended directly from a fixture above the oven chamber. AABO-IDEAL ovens are available for different temperature ranges. This means that the insulation layers and the construction of the oven are different. 0 - 100 [...]

See product

Aabo-Ideal powder cooking ovens

The kiln is typically used with manual or high-capacity Power & Free conveyor systems, where heat treatment is part of the progressive finishing process. Ovens are also used as a stand-alone unit, where the elements to be treated are transported for heat treatment, e.g. by means of rollers and racks, or suspended directly from a fixture above the oven chamber. AABO-IDEAL furnaces are available for different temperature ranges. This means that the insulation layers and the constructions of the furnace are different. 0 - [...]

See product