FL tüüpi filtrid - Elister
/
Metal industry
Powder coating technologiesLiquid dyeing technologiesConveyor systemsPaintingrooms and -linesRobot solutionsMeasuring instrumentsDedustingIndustrial ventilationWelded ventilationBlasting technologiesHeat recovery solutions
/
Dedusting
Oil collection systemsIndustrial vacuum cleanersDust cyclonesDust filters
/
Dust filters
/
FL type filters

FL type filters

A space-saving "Plug & Play" filtration unit with integrated fan for air filtration in dusty environments.

Ideal for filtering air from welding, cutting, grinding, etc. filtration.

The unit is delivered ready for use, equipped with forklift loops and crane lifting points for easy transport and installation.

An integrated motor starter and a CEE connector on the front make connecting the filter quick and convenient. The unit can also be operated with an external frequency converter controlled by pressure differential sensors. Pressure differential readings can be read on the easily accessible digital filter control display located on the front of the unit.

Filterline equipment with/without selected Airtower modules (PFL) is W3 certified and very well suited for welding applications.

Read also our blog post on welding filters.

Ask for a quote
  • The polluted air is introduced into the unit through a tangential inlet at the top of the air chamber into the top of the raw air chamber, which provides the air flow and pre-separation of the tubular filter, which promotes filter load reduction. Since the filter is of the cyclone type, the pre-separation is already much more efficient than with other filter types.
  • The air is filtered through a vertically positioned filter pad, which optimises the cleaning effect.
  • Cleaning of differential pressure regulated cartridges by means of an integrated compressed air system.
  • Clean air is recirculated back to production through connections
  • Dust is collected in a dust collector at the bottom of the appliance. Quicklock-adjustable dust collector is flanged with ø400mm gasket.

CAN BE USED FOR VENTILATION/AIR PURIFICATION OF ROOMS, W3 CERTIFIED.

For cleaning slightly contaminated indoor air, e.g. welding fumes. The Filterline FL52 and FL 104 can be ordered with airflow distribution modules installed to improve the separation of contaminated and purified air at the top and bottom of the unit (recirculation).

FeatureValue
Air exchangeup to 8200 m³/h
Vacuumup to 5000 Pa
Filter surface26 - 168m²

Vaata lisaks

HCF seeria filter

HCF type filter

Optimised capacity and maintenance-friendly filter for a variety of larger filtration tasks. The filter is used for filtering welding and cutting fumes, grinding dust and various exhaust air. At the time of delivery, the filter is assembled and ready for immediate use after connecting the piping and power supply. The HFC models are designed for vacuum up to 5000 Pa.

See product

Cyclone filter ACF

Optimised capacity filter for various larger filtration tasks. The filter is used for filtering welding and cutting fumes, grinding dust and various exhaust air containing metal, stone, plastic or similar dust or a mixture of different powders. At the time of delivery, the filter is complete and ready for immediate use after connection of the piping and power supply. The ACF and ACF-T models are designed for vacuum up to 5000 Pa and the ACF-V series filters are [...]

See product

QFG type filters

An energy-optimised filter for a variety of major filtration tasks. The filter is used for filtering welding and cutting fumes, grinding dust and various exhaust air containing dust from metal, stone, plastic, etc. or various powder mixtures. At the time of delivery, the filter is complete and ready for immediate use after connection of the piping and power supply.

See product