The Graco Twistork is a snail-type pneumatic mixer designed primarily for the active handling of high viscosity paints, varnishes and sealants. The snorkel element is located directly inside the suction tube, eliminating the need for a separate suction tube to feed the material. A transfer pump can be added if required when working with more viscous substances.
The unit is pneumatic, with a transmission ratio of 1.82:1, and has an output of 0.4 kW. A version with oil-free air motor and reversing function is also available. Elister is Graco's official agent in Estonia - ask for a quote.
Ask for a quote
"*" indicates required fields
The Twistork mixer is designed for everyday industrial use, where materials need to maintain a consistent consistency throughout the process. The pond-based mixing principle ensures continuous circulation in the tank without material separation.
Twistork is particularly suitable for industrial paint shops and automatic spray lines where thick or fast-settling material is used. Typical applications: metal finishing lines, car body shops, woodworking factories.
For more information and a quote, please contact Elister specialists.
Elister IBC Container Mixer - Large Capacity Mixer with Electric Drive The Elister IBC Container Mixer is an electric mixer developed by Elister specifically for use with 1000 litre IBC containers. The unit keeps paints, varnishes and other viscous substances at a uniform consistency by means of continuous circulation, avoiding sludge formation at the bottom of the container. The speed of the mixer is adjustable by means of a variator between 0 and 400 [...]
The IBC container pneumatic mixer is designed for use with 1000 litre containers. It allows mixing of materials, maintaining a uniform consistency or avoiding sludge formation at the bottom of the container. The speed of the mixer is adjustable by means of an air regulator, allowing precise control of the mixing process.
The mixer is particularly important for substances containing a heavy solid component. Mixing prevents the heavy component from settling to the bottom of the vessel. This ensures an even distribution of the solid component over the entire surface. Also, the pump will not wear or clog due to dry components settling on the bottom of the vessel.
