We are the exclusive representative of the Danish manufacturer Unifog Denmark for irrigation systems in Estonia. Unifog has almost 25 years of sales history in Estonia and to date has installed over 100 systems in various well-known Estonian companies.
The solution for each production needing an irrigation system is calculated precisely on the basis of the production situation, taking into account the production temperatures, the air movements and the recommended humidity levels for the different areas to be irrigated.
After the installation of the irrigation system, we take care of the maintenance of the system and always perform maintenance at the end of the season.
Water softener - A purification system is necessary for irrigation to work successfully. When a purification system is installed on the system, it is ensured that only pump oil changes and filter changes are required during maintenance. The water softener performs a purge cycle after every 6000 litres of water or after 30 days. Typically, competing purification cycles are set at 6 months, which significantly reduces water quality. After [...]
The UNIFOG UniControl control panel is the system's control body, which monitors and controls the operation of all the zones in the system. It is a touch screen control panel that is used to enter the necessary operating parameters and to monitor real examples in the production room. Up to 16 zones can be added to the panel as zone extensions. Digital humidity sensors for the required zones are included in the price of the system to measure the humidity level in the respective zones.
Advantages:Quiet Easy to install and to move around if necessary Can irrigate a larger area at a time Can also be installed at a height of 1 m from the ceiling 230 or 24 V power supply Also available as EEx solution Up to 12 nozzles can be installed.
The heart of the dehumidification system, the high-pressure water pump, is a device that raises the water pressure from 2 bar to 60 bar. High-pressure water has to pass through a small nozzle which turns the water droplet into a water slurry. When selecting the pump, the water demand of the different zones of the system is calculated and the pump capacity is selected on this basis. Before the pump, the water passes through a water softener and filters to prevent scale formation and dirt [...] [...]
The water is mechanically purified in a 5my density filter, then recirculated in membranes with a movement of 0001-.0001 mm, from where ions as well as all dissolved substances are recovered. The pressure in this pump is typically 14-15 bar. After the membranes, the water is collected in a hydrophore and, after passing through a water softener, the water is discharged. The water pressure at the inlet is 2-5 bar. It should also be noted that after purification, the water [...]
UNIFOG irrigation nozzles are made of stainless steel. The nozzles are available in different sizes ranging from 2.2 to 4.5 litres per hour. The nozzles are equipped with a non-return valve that closes when the water pressure is lower than 30 bar. This ensures that the nozzles operate perfectly and eliminates backflow due to pressure drop. The nozzles are attached to the pipeline by means of nozzle holders which are press-fitted with a special press tool.
The combination of 50 years of practical and theoretical experience has made Unifog Denmark ApS one of the leading European companies in its field.
To date, Unifog Denmark ApS has installed more than 5,000 humidification systems across Europe and the quality of each system reflects the company's knowledge and experience. Unifog Denmark ApS was founded by the current owners Ejvind and Poul in 1993 with the main objective of providing the best possible environment in production facilities; office buildings, public institutions and other places where indoor climate plays an important role.
EN 
ET 
RU 
FI