OUPC seeria vedelikueraldajad - Elister
/
Metal industry
Powder coating technologiesLiquid dyeing technologiesConveyor systemsPaintingrooms and -linesRobot solutionsMeasuring instrumentsDedustingIndustrial ventilationWelded ventilationBlasting technologiesHeat recovery solutions
/
Dedusting
Oil collection systemsIndustrial vacuum cleanersDust cyclonesDust filters
/
Oil collection systems
/
OUPC series liquid separators

OUPC series liquid separators

Compact multi-stage filter for cooling lubricants for direct installation on processing machines.
For filtering oil mist, emulsion mist, minimum amount of lubrication and oil smoke. The filter's 4 stages of separation ensure versatility.
Degree of separation min. 99,95% of all cooling oil particles. The separated particles shall be reintroduced into the machine, if necessary.

Ask for a quote

Product features

  • Contaminated air is discharged at the end of the separator into a pre-distribution chamber for air distribution and compression.
  • Accumulated particles are directed to a washable PPi35 pore filter (50% higher efficiency than aluminium grease filter).
  • The air is then finely filtered into filter G104A. Separation efficiency > 99% af particles above 0,1 um
  • Under the first two filter stages there is a ½" water cup with a liquid reservoir.
  • The last filter stage is a HEPA filter, filter class H13, which ensures > 99.95% particulate removal down to 0.1 µm.

General device, low operating costs

The 4-stage separation principle in the OUPC ensures an optimal filtration solution, regardless of the type of cooling oil.

The large surface area of the washable pre-filter and the self-retracting filter cassette ensure long service life and low pressure drop, minimising energy and filter replacement costs. The high filtration efficiency of the third filter stage ensures a very long filter life.

Compact and space-saving solution

The horizontal design of the OUPC 500 - 1010 offers a particularly compact and space-saving filter solution for installation directly on the machine centre. Models with integrated fan are also available, making the unit particularly compact.

Advantages of removing oil leaks directly from the machine root

  • Reduces harmful effects on breathing and skin.
  • Less risk of slippery floors and resulting accidents.
  • Reducing the risk of fire and the risk of aerosols that generate oil mist damaging machinery electronics.
  • Cleaning and maintenance costs are reduced because oil deposits in pipes and on surfaces are avoided.
  • Reduced energy consumption (reduced air velocity in the ventilation ducts, no heavy oil particles to keep in the air and no oil mist in the oil reservoirs).
FeatureValue
Model 500/510 capacityup to 500m³/h
Model 1000/1010 Capacityup to 1000m³/h
Model 2000/2010 capacityup to 1200m³/h
Model 4000/4010 throughput capacityup to 4000m³/h

Vaata lisaks

OUF vedeliku separaator

OUF series liquid separator

Used for the separation of sprayed liquid from processing equipment using cooling lubricants. Mounted directly on the machine to prevent the spray mist from entering the central pipeline. After separation of the sprayed liquid by the OUF device, the air must be filtered by a multi-stage sprayed liquid filter, e.g. of the OUK type, so that the sprayed liquid emission requirements are met.

See product

OUK series liquid separator

Separation in three stages: speed reduction, pre-separation in a grease filter and fine filtration in a compact filter F9 Options: HEPA filter (H13), activated carbon filter and minihelic differential pressure gauge (filter control device) Discharge valve for liquid ejection Filter change through front hatch Reversible feed (right/left) Top outlet Standard canister can be mounted on floor or wall with Gram Flexmountings Max. flow rate. Max. vacuum: 3,000 Pa Max. +25°C in exhausted air

See product