PosiTest AT manuaalne ja automaatne adhesioooni mõõtja - Elister
/
Wood industry
Industrial ventilationAspiration systemsMeasuring instrumentsGluing equipmentIrrigation systemsRobot solutionsConveyor systemsFinishing machinesFinishingColour rooms and colour lines
/
Measuring instruments
Environmental measuring instrumentsThickness gaugesGlossmetersNUCLEAR STRENGTH MEASUREMENTSViscosity meters
/
NUCLEAR STRENGTH MEASUREMENTS
/
PosiTest AT manual and automatic adhesion meter

PosiTest AT manual and automatic adhesion meter

The PosiTest adhesion tester measures the force that can be used to remove a test coating of a given diameter from the surface to be tested by applying hydraulic pressure. Similar to MPa, the pressure in PSI is indicated on the LCD indicator, which can be the same as the adhesion force for a given surface.

Ask for a quote
  • The small gauge can be used in any position, exactly suitable for laboratories and outdoor conditions.
  • The low-cost, single-use test element eliminates the need for repeated heating and cleaning.
  • Large LCD indicator.
  • Self-measuring test elements let you measure any measurement on the surfaces to be processed.
  • Complies with ASTM D4541, ISO 4624.
  • The hydraulic system of each tester is calibrated and fortified to an accuracy of ± 1%.

Vaata lisaks

Adhesion tap tester CC2000

A scratch tester is a tool used to test the strength and adhesion of a given surface by scratching dry painted surfaces. It consists of a set of parallel blades which, when pulled twice perpendicularly, produce 25 or 100 identical squares. After the area has been cut, running the tape or the stiffer brush supplied over it will show how deep the surface will allow the scratches to form. Repeating the operation will change the depth.

See product