Coatmaster technology (ATO) allows the thickness to be measured immediately after application. The technology is non-contacting and non-destructive, without hazardous emissions, and is suitable for non-contacting measurement of metal, paper, rubber, ceramic, glass, plastic surfaces (AT and INLINE can also measure layer thickness on stronger wooden surfaces).
ATLINE designed to be as compact as possible, intended for use in the laboratory / for subsequent measurements. The ATLINE has a measuring speed of 3 seconds and no anti-dust protection.
"*" indicates required fields
| Feature | Value |
|---|---|
| Dried surfaces/shrunken surfaces | 2 - 1000 μm |
| Water-based paints before drying | 2 - 300 μm |
| Powder coated products before heating | 10 - 300 μm |
| Time to measurement | up to 3 ssec |
| Ability to measure moving products | Yes |
| Measures all colours (including white surfaces) | Yes |
| Real-time data via ERP and browser | Yes |
Coatmaster technology (ATO) allows the thickness to be measured immediately after application. The technology is non-contacting and non-destructive, without hazardous emissions, and is suitable for non-contacting measurement of metal, paper, rubber, ceramic, glass, plastic surfaces (AT and INLINE can also measure layer thickness on stronger wooden surfaces). The INLINE is designed to measure the layer thickness of products moving from the line (before the oven). The instrument is designed for consistent measurements - the electronics and the optical eye are [...]
Coatmaster technology (ATO) allows the thickness to be measured immediately after application. The technology is non-contacting and non-destructive, without hazardous emissions, and is suitable for non-contacting measurement of metal, paper, rubber, ceramic, glass, plastic surfaces (AT and INLINE can also measure layer thickness on stronger wooden surfaces). Advantages.
Coatmaster 3D can be installed as a part of a production line, thus providing a consistent overview of the layer thicknesses. The biggest advantage of the 3D model over other models is the three-dimensionality of the measurements, which can be used to obtain information on both external and internal surfaces. As with other Coatmaster devices, the measurement results are transferred to a server, where they can be analysed when needed. In addition, the [...]
EN 
ET 
RU 
FI