In an era of increasing attention and emphasis on energy saving and controlling material consumption, manufacturers such as Coatmaster equipment at any price.
Coatmaster equipment is designed to check the thickness of the paint coating on different surfaces (metal, glass, stone, plastic, wood) in a non-contact way before the baking or drying process starts, thus allowing to assess whether the coating thickness is sufficient or too thick.
In addition, you can also measure the thickness of an already crystallised layer of powder paint, as well as the thickness of a dried layer of liquid paint, making it a highly versatile tool.
The range includes the Coatmaster Flex hand-held unit as well as the Inline, Atline and 3D automatic units.
Coatmaster technology (ATO) allows the thickness to be measured immediately after application. The technology is non-contacting and non-destructive, without hazardous emissions, and is suitable for non-contacting measurement of metal, paper, rubber, ceramic, glass, plastic surfaces (AT and INLINE can also measure layer thickness on stronger wooden surfaces). The INLINE is designed to measure the layer thickness of products moving from the line (before the oven). The instrument is designed for consistent measurements - the electronics and the optical eye are [...]
Coatmaster technology (ATO) allows the thickness to be measured immediately after application. The technology is non-contacting and non-destructive, without hazardous emissions, and is suitable for non-contacting measurement of metal, paper, rubber, ceramic, glass, plastic surfaces (AT and INLINE can also measure layer thickness on stronger wooden surfaces). Advantages.
Coatmaster technology (ATO) allows the thickness to be measured immediately after application. The technology is non-contacting and non-destructive, without hazardous emissions, and is suitable for non-contacting measurement of metal, paper, rubber, ceramic, glass, plastic surfaces (AT and INLINE can also measure layer thickness on stronger wooden surfaces). The ATLINE is designed to be as compact as possible, for use in the laboratory / for subsequent measurements. The ATLINE has a measurement speed of 3 seconds and no powder [...]
Coatmaster 3D can be installed as a part of a production line, thus providing a consistent overview of the layer thicknesses. The biggest advantage of the 3D model over other models is the three-dimensionality of the measurements, which can be used to obtain information on both external and internal surfaces. As with other Coatmaster devices, the measurement results are transferred to a server, where they can be analysed when needed. In addition, the [...]
EN 
ET 
RU 
FI