The wire mesh conveyor shot blast machine is mostly used for the processing of medium and large sized die castings, forged parts, heat treated parts, automotive parts, iron and non-ferrous castings, welded structures and finished products. Parts can weigh from 1 kg to 100 kg. The KTP machine is extremely versatile and is built to remove casting sand residues, rust, old paint, visible welding and forging marks, oxidised coatings caused by thermal treatment, micro-treatment, surface strengthening, reduction of the effect of surface micro-cracks, etc....
Ask for a quote
"*" indicates required fields
The items are placed on a wire mesh belt conveyor that passes through the operating zones of the shotcrete machine and the cleaning tunnel. The wound turbines are installed at different angles. The machine body is protected by wear-resistant manganese steel plates.
The high efficiency of the LNG machine is made possible by a continuous abrasive handling and return system, which allows for the continuous return and cleaning of the abrasive material. The size of the KTP machine, the number and power of the turbines, the length of the wire-mesh conveyor, the width of the conveyor and the adjustment of the rotation frequency of the turbines are adjusted according to the capacity requirements and the specificities of the workpiece to be processed by the buyer.
| Feature | Value |
|---|---|
| Max. part size ø x b (mm) | 600×400, 800×500, 1000×500, 1250×600 |
| Number of turbines | 4, 8 |
| Turbine engine power | 7.5 kW, 11 kW, 15 kW |
| Air exchange | 4000 - 18000 m3/h |
This GOSTOL shotcutting machine is designed for the machining of the external surfaces of pipes/tubes, round profiles, gas cylinders and other cylindrical elements. The welding process allows easier and faster cutting and welding of steel semi-finished products with a clean surface. Welding prior to surface finishing multiplies the increase in surface resistance to corrosion. The workpieces pass through the shot peening machine on a conical cylindrical or inclined roller conveyor. This type of conveyor ensures simultaneous [...]
The roller conveyor shot blast machine is built to clean large parts such as steel plates, profiles, I- and H-beams and simple structures. This type of shot blasting machine is most commonly used for descaling, rust removal, paint stripping, paint preparation, and general surface preparation prior to welding, cutting, machining and flame cutting operations.
The manganese steel tape tumbling machine is ideal for mass-produced parts that can be tumbled and perfectly meets your requirements for casting and mould cleaning. Manganese steel strip tumbling machines are most commonly used for the processing of ferrous and non-ferrous castings, forgings, weldments and heat-treated parts and can be integrated into a fully automatic process by adding loading and unloading equipment. G-type automatic shot peening machines are sized to [...]
EN 
ET 
RU 
FI