Coatmaster Flex unikaalne kontaktivaba kihipaksusmõõtja - Elister
/
Metal industry
Powder coating technologiesLiquid dyeing technologiesConveyor systemsPaintingrooms and -linesRobot solutionsMeasuring instrumentsDedustingIndustrial ventilationWelded ventilationBlasting technologiesHeat recovery solutions
/
Measuring instruments
Environmental simulation cabinetsEnvironmental measuring instrumentsThickness gaugesGloss and hue measuring instrumentsNUCLEAR STRENGTH MEASUREMENTSViscosity metersHardness testersSoftware
/
Thickness gauges
Elcometer thickness gaugesCoatmaster thickness gauges
/
Coatmaster thickness gauges
/
Coatmaster Flex unique non-contact coating thickness gauge

Coatmaster Flex unique non-contact coating thickness gauge

Coatmaster technology (ATO) allows the thickness to be measured immediately after application. The technology is non-contacting and non-destructive, without hazardous emissions, and is suitable for non-contacting measurement of metal, paper, rubber, ceramic, glass, plastic surfaces (AT and INLINE can also measure layer thickness on stronger wooden surfaces).

Advantages:

  • Avoid round-trips and the time it takes to find out about anomalies in the process.
  • Save coating material up to 30% by applying the correct layer thickness to products, not more just in case.
  • Set standards for your products and produce high-quality products
Ask for a quote
FeatureValue
Dried surfaces/shrunken surfaces 1- 1000 μm
Water-based paints before drying1 - 400 μm
Powder coated products before heating1 - 400 μm
Time to measurementfrom 20 msec
Measuring distance from detail2 - 15 cm
Calendering tolerances± 70°
Ability to measure moving productsYes
Measures all colours (including white surfaces)Yes
Real-time data via ERP and browserYes
Weight without battery1.3 kg
Dimensions374 x 91 x 203 mm
Relative standard deviation<1 %

Vaata lisaks

Coatmaster Inline

Coatmaster technology (ATO) allows the thickness to be measured immediately after application. The technology is non-contacting and non-destructive, without hazardous emissions, and is suitable for non-contacting measurement of metal, paper, rubber, ceramic, glass, plastic surfaces (AT and INLINE can also measure layer thickness on stronger wooden surfaces). The INLINE is designed to measure the layer thickness of products moving from the line (before the oven). The instrument is designed for consistent measurements - the electronics and the optical eye are [...]

See product

Coatmaster Atline automatic thickness gauge

Coatmaster technology (ATO) allows the thickness to be measured immediately after application. The technology is non-contacting and non-destructive, without hazardous emissions, and is suitable for non-contacting measurement of metal, paper, rubber, ceramic, glass, plastic surfaces (AT and INLINE can also measure layer thickness on stronger wooden surfaces). The ATLINE is designed to be as compact as possible, for use in the laboratory / for subsequent measurements. The ATLINE has a measurement speed of 3 seconds and no powder [...]

See product

Coatmaster 3D three-dimensional coating thickness gauge

Coatmaster 3D can be installed as a part of a production line, thus providing a consistent overview of the layer thicknesses. The biggest advantage of the 3D model over other models is the three-dimensionality of the measurements, which can be used to obtain information on both external and internal surfaces. As with other Coatmaster devices, the measurement results are transferred to a server, where they can be analysed when needed. In addition, the [...]

See product